Sanlarix Work 4-in-1 Automatic Wire Stripper with NCV
STRIP WITHOUT CONSTANTLY CHANGING THE JAW SIZE
The automatic stripping mechanism adapts to different conductor sizes within its working range. An adjustable strength control lets the user fine-tune the grip when working with different insulation types, while the sliding length stop helps maintain a more consistent exposed conductor length. The manual specifically notes loosening or tightening the adjustment when stripping is too aggressive or slips.
SET UP THE STRIP FOR THE WORK IN FRONT OF YOU
Different insulation and conductor sizes can require different stripping force. GD306 provides both stripping-strength adjustment and a movable length stop, allowing the tool to be tuned for the specific wire instead of relying on a fixed setup.
CUT AND CRIMP WITHOUT BREAKING YOUR WORKFLOW
Wire preparation often involves more than removing insulation. The GD306 also integrates a cutter for copper and aluminium conductors and dedicated crimping zones for insulated and non-insulated terminals.
ADD A QUICK VOLTAGE CHECK BEFORE THE NEXT STEP
The built-in NCV detector adds a non-contact way to check for the presence of voltage before beginning further work. The specified detection range is 70–300 V, with audible and visual indication during detection.
STRIP WITHOUT CONSTANTLY CHANGING THE JAW SIZE
The automatic stripping mechanism adapts to different conductor sizes within its working range. An adjustable strength control lets the user fine-tune the grip when working with different insulation types, while the sliding length stop helps maintain a more consistent exposed conductor length. The manual specifically notes loosening or tightening the adjustment when stripping is too aggressive or slips.
SET UP THE STRIP FOR THE WORK IN FRONT OF YOU
Different insulation and conductor sizes can require different stripping force. GD306 provides both stripping-strength adjustment and a movable length stop, allowing the tool to be tuned for the specific wire instead of relying on a fixed setup.
CUT AND CRIMP WITHOUT BREAKING YOUR WORKFLOW
Wire preparation often involves more than removing insulation. The GD306 also integrates a cutter for copper and aluminium conductors and dedicated crimping zones for insulated and non-insulated terminals.
ADD A QUICK VOLTAGE CHECK BEFORE THE NEXT STEP
The built-in NCV detector adds a non-contact way to check for the presence of voltage before beginning further work. The specified detection range is 70–300 V, with audible and visual indication during detection.
ONE MOTION TO PREPARE THE CONDUCTOR
Automatic jaws are designed to grip the insulation and perform the stripping movement as the handles are squeezed. Once released, the tool returns to its starting position, ready for the next conductor.
ONE MOTION TO PREPARE THE CONDUCTOR
Automatic jaws are designed to grip the insulation and perform the stripping movement as the handles are squeezed. Once released, the tool returns to its starting position, ready for the next conductor.
ONE TOOL FOR DIFFERENT ELECTRICAL WORK ENVIRONMENTS
The multifunctional design fits service, installation and bench-preparation tasks where wires need to be checked, stripped, cut or terminated as part of the same workflow.
FAQ
The stripping mechanism is designed for conductors from 10 to 24 AWG, approximately 0.2 to 6.0 mm².
Yes. A dedicated cutting section is integrated into the tool and is designed for copper and aluminium conductors.
The integrated crimping sections support insulated and non-insulated terminals from 10–22 AWG / 0.5–6.0 mm². The tool also includes a section for 7–8 mm² ignition terminals.
The built-in NCV module provides non-contact voltage detection. The specified detection range is 70–300 V, with light and audible indication when voltage is detected.
Yes. The NCV module uses two 1.5 V LR44H button batteries.
Reviews
Very useful tool for everyday electrical work. The automatic stripping mechanism works smoothly, and I like having the cutter and crimping sections in the same tool. The NCV function is also convenient for a quick preliminary check.
Compact, solid and comfortable to use. I mainly use it for stripping and cutting control wires, and the adjustable stripping length is especially helpful when preparing several conductors in a row.
A practical all-in-one tool for service work. The handles feel good in the hand, the stripping action is fast, and it saves space in the tool bag because I do not need to carry separate basic tools for every step.
- Choosing a selection results in a full page refresh.