Sanlarix AquaReach — 12 ft Telescopic Solar Panel Cleaning Kit
WATER DELIVERED TO THE BRUSH HEAD
The Sanlarix AquaReach combines manual brushing with water supplied directly to the head. The blue hose connects to the head’s distribution tubing, allowing you to wet the working area while guiding the bristles across the surface. This keeps brushing and rinsing together in one tool. The included orange connector provides the supply connection; check that it matches your water outlet before use. The brush operates manually and requires no electrical connection.
ADJUST THE LENGTH TO THE TASK
The telescopic aluminium pole lets you change the working length without connecting separate pole sections. Extend only as far as needed, then secure the clamp locks before cleaning. The nominal 12 ft version has a supplier-listed maximum pole length of approximately 3.6 metres and retracts to approximately 154.5 centimetres for storage. Keeping the pole shorter when the surface is nearby makes it easier to guide. Pole length describes the tool itself; achievable working reach depends on the position of the user and installation.
POSITION THE HEAD FOR THE SURFACE
The adjustable joint lets you set the brush head to suit the inclination of the panel. Position the head, tighten the side knob and check that it is secure before starting. This helps you maintain bristle contact while making steady, overlapping passes. The rectangular head has blue outer bristles and a black centre, with an overall width of approximately 33 centimetres. Use controlled pressure and keep the bristles clear of trapped grit, following the cleaning guidance supplied by your panel manufacturer.
A PRACTICAL GRIP FOR ROUTINE CLEANING
Blue foam grip sections provide cushioned hand positions along the lower pole for two-handed handling. One hand supports the tool while the other guides the direction of each pass. The telescopic design allows the pole to be shortened after use, making it easier to carry and store between cleaning sessions. Before putting the kit away, rinse debris from the bristles, allow the components to dry and coil the hose without tight bends.
WATER DELIVERED TO THE BRUSH HEAD
The Sanlarix AquaReach combines manual brushing with water supplied directly to the head. The blue hose connects to the head’s distribution tubing, allowing you to wet the working area while guiding the bristles across the surface. This keeps brushing and rinsing together in one tool. The included orange connector provides the supply connection; check that it matches your water outlet before use. The brush operates manually and requires no electrical connection.
ADJUST THE LENGTH TO THE TASK
The telescopic aluminium pole lets you change the working length without connecting separate pole sections. Extend only as far as needed, then secure the clamp locks before cleaning. The nominal 12 ft version has a supplier-listed maximum pole length of approximately 3.6 metres and retracts to approximately 154.5 centimetres for storage. Keeping the pole shorter when the surface is nearby makes it easier to guide. Pole length describes the tool itself; achievable working reach depends on the position of the user and installation.
POSITION THE HEAD FOR THE SURFACE
The adjustable joint lets you set the brush head to suit the inclination of the panel. Position the head, tighten the side knob and check that it is secure before starting. This helps you maintain bristle contact while making steady, overlapping passes. The rectangular head has blue outer bristles and a black centre, with an overall width of approximately 33 centimetres. Use controlled pressure and keep the bristles clear of trapped grit, following the cleaning guidance supplied by your panel manufacturer.
A PRACTICAL GRIP FOR ROUTINE CLEANING
Blue foam grip sections provide cushioned hand positions along the lower pole for two-handed handling. One hand supports the tool while the other guides the direction of each pass. The telescopic design allows the pole to be shortened after use, making it easier to carry and store between cleaning sessions. Before putting the kit away, rinse debris from the bristles, allow the components to dry and coil the hose without tight bends.
SOLAR PANEL CARE FOR HOMES AND WORKPLACES
The Sanlarix AquaReach supports routine manual cleaning across accessible domestic and commercial solar installations. Adjust the pole length and head angle to the working position, keep a steady two-handed grip and guide the brush across each module in controlled passes.
FAQ
The pole is telescopic. Its nested sections slide to adjust the length and are secured with external clamp locks featuring blue levers.
The supplier lists a maximum pole length of approximately 3.6 metres. This is the length of the tool, rather than a guaranteed cleaning height.
No. Brushing is manual, and water is supplied through the hose from a compatible external source.
Yes. The head has an adjustable joint with a side tightening knob. Set the angle and check that the joint is secure before cleaning.
Compatibility depends on the outlet and connection type. Check the pictured orange connector against your water supply; the supplier’s examples do not cover every tap design.
Reviews
Our panels are close enough that I rarely need the full pole length. Being able to shorten it for the nearest modules makes the brush easier to guide, and it fits along the garage wall afterwards
I like having the water feed at the brush rather than swapping between brushing and holding a hose. It took a little time to arrange the hose neatly, but that made moving along the row more comfortable
The padded grip is a useful detail. I hold the pole with both hands and work across one panel at a time. Setting the head angle first helps keep the bristles in contact without pushing too hard
- Choosing a selection results in a full page refresh.