Portable EV Charger 3.5 kW | 16A | App Control | Type 1 / Type 2 / GBT

Portable EV Charger 3.5 kW (16A) with App — Type 1 / Type 2 / GBT

Upgrade your daily charging with a compact, app-controlled portable EV charger. Delivering up to 3.5 kW (16A) on single-phase AC, it supports Type 1 (SAE J1772), Type 2 (IEC 62196-2), and GBT interfaces, with adjustable current (6/8/10/13/16A) to match your outlet and vehicle. Smart scheduling, real-time status, and multi-layer safety let you charge confidently at home or on the go.

Why drivers choose this portable EV charger

• Smart control via app: Start/stop charging remotely, set delay timers, and check real-time status anytime.

• Flexible & efficient: Up to 3.5 kW (16A) single-phase output; fine-tune current for older outlets or limited circuits.

• Ten-fold protection: Over-current, over-temperature, short-circuit, leakage, and more—engineered for safe, worry-free charging.

• Built for real life: Rated IP54 against dust and splashes; performs from –30 °C to +65 °C (hot, dusty, or snowy conditions).

• Temperature intelligence: Live monitoring reduces power >75 °C and stops at ≥85 °C (cut-off ≈0.2 s), then automatically resumes <65 °C.

Key specifications

• Charging standards: Type 1 (SAE J1772) / Type 2 (IEC 62196-2) / GBT

• Rated power / current: 3.5 kW, 16A, single-phase AC

• Input voltage: 110–250 V AC (supports US 120 V/240 V circuits)

• Current steps: 6 / 8 / 10 / 13 / 16A (adjustable)

• Ingress protection: IP54 (dust- and splash-resistant)

• Operating temperature: –30 °C … +65 °C

• Cable spec: 3G 2.5 mm² + 1×0.5 mm²

• Total length: 3.5 m (≈11.5 ft)

• Control features: Remote start/stop, real-time status, delayed/appointed-time charging

• Safety logic: Power derating above 75 °C, thermal cut-off at ≥85 °C, auto-resume at ≤65 °C

US plug note: The unit is shown with a Schuko (EU) plug. For use on US outlets (NEMA 5-15/5-20 at 120 V or NEMA 6-15/6-20/14-xx at 240 V), an appropriate adapter or receptacle is required. For safety and code compliance, consult a qualified electrician.

Compatibility

• Works with EVs that accept Type 1 (SAE J1772), Type 2, or GBT, depending on the variant you select.

• Ideal as a portable Level 1/Level 2 solution (voltage-dependent). Use lower current on weak circuits or older outlets.

In the box

• Portable EV charger with integrated cable (3.5 m)

• User guide

• (Carrying case if applicable)

Use cases

• Home charging on dedicated 120 V/240 V circuits

• Travel & workplace top-ups with adjustable current

• Adverse weather thanks to IP54 and wide temperature range